KIKO LOUREIRO SIGNATURE
Inputs: 2 x 2
Pre amp valves: 2 x ECC83
Power amp valves: 1 x EXX8, 4 x EL34
Neck type: KIKO10P5pc Maple/Walnut neck w/KTS™ TITANIUM rods
Top/back/body: Flamed Maple topAlder body
Fretboard: Rosewood fretboardKIKO special inlay on 12th fret inlay
Fret: Jumbo fretsPremium fret edge treatment
Number of frets: 24
Bridge: Edge-Zero II bridge
String space: 10.8mm
Neck pickup: DiMarzio® KIKO original (H) neck pickupPassive/Ceramic
Middle pickup: DiMarzio® KIKO original (S) middle pickupPassive/Alnico
Bridge pickup: DiMarzio® KIKO original (H) bridge pickupPassive/Ceramic
Factory tuning: 1E,2B,3G,4D,5A,6E
Strings: D’Addario® EXL110
String gauge: .010/.013/.017/.026/.036/.046
Nut: Locking nut
Hardware color: Black
Scale : 648mm
a : Width: 42mm at NUT
b : Width: 57mm at 24F
c : Thickness: 20mm at 1F
d : Thickness: 22.3mm at 12F
Radius : 400mmR
KIKO100 Transparent Ruby Red
Body type: Solid body
Neck type: KIKO100
Body material: Alder w/ flamed maple top
Neck joint: AANJ
Bridge: Edge tremolo
Knob style: Knurled metal dome
Hardware color: Cosmo black
Neck material: 5-piece maple/ walnut
Scale length: 648mm/ 25½»
Fingerboard material: Rosewood
Fingerboard inlays: Special abalone inlay on 12th fret
Frets: 24 / jumbo
Body material: Mahogany w/ 3mm AAAA quilted maple top
Bridge: Edge tremolo (10.8mm string spacing)
Knob style: Gotoh VK1-19 knurled metal dome
Neck type: KIKO200
Neck material: 5-piece wenge/ maple
Fingerboard material: Macassar ebony
Fingerboard inlays: Small dot w/ special inlay on first fret
Frets: 24 / jumbo (Prestige edge treatment)
Nut: Top-Lok III (42mm)
Machine heads: Gotoh SG381
Dual Combo Inputs: TS, TRS, and XLR, variable impedance and level controls, built-in microphone preamps, and phantom power supplies.
1/4” Output jacks: two mono, balanced (TRS) outputs provide pristine sound quality and optimal noise performance.
XLR Output jacks: two mono, balanced XLR output jacks.
MIDI In, Out/Thru
USB: Ultra-low latency audio transmission, firmware updates, MIDI.
11 stainless steel stomp+rotary actuators for switching and rotational control. All audio connectors are Neutrik®
Three Channels: Clean, OD2, and OD1.
Violence Switch: OD2 and OD1 channels have an assignable VIOLENCE stage for increasing the overall gain.
Push/Pull Bass Pot: Passive interactive low-frequency equalization for all channels.
Switch: 3-way switch for negative feedback control of low-frequency interaction between amplifier and speakers. Left: Low; Center:High; Right: Medium.
Hair Switch: 3-way switch for negative feedback control of high-frequency interaction between amplifier and speakers. Left: Medium; Center: Low; Right: High.
Bright Switch: 3-way bright switch for each channel
High-carbon steel core
Gauges: 010 – 013 – 017 – w26 – 036 – 046
Enhanced frequency response in the 2 – 5 kHz for more punch, crunch and bite
Strength of the strings: 010 – 046
Strength of the strings: 0,010″–0,046″
G-String Wound: No
NYXL 10-52 (for D standard Megadeth)
Core of high carbon steel
Gauges: 010-013-017 – w30-42-52
30% stronger strings and better output
Improved frequency response of 2 to 5 kHz increases beat, wrinkle and bite