Model1: JCM8002203

Range: Vintage

Technology: Valve

Channels: 1

Wattage: 100W

Inputs: 2 x 2

Pre amp valves: 2 x ECC83

Power amp valves: 1 x EXX8, 4 x EL34

SPECS:

Neck type: KIKO10P5pc Maple/Walnut neck w/KTS™ TITANIUM rods

Top/back/body: Flamed Maple topAlder body

Fretboard: Rosewood fretboardKIKO special inlay on 12th fret inlay

Fret: Jumbo fretsPremium fret edge treatment

Number of frets: 24

Bridge: Edge-Zero II bridge

String space: 10.8mm

Neck pickup: DiMarzio® KIKO original (H) neck pickupPassive/Ceramic

Middle pickup: DiMarzio® KIKO original (S) middle pickupPassive/Alnico

Bridge pickup: DiMarzio® KIKO original (H) bridge pickupPassive/Ceramic

Factory tuning: 1E,2B,3G,4D,5A,6E

Strings: D’Addario® EXL110

String gauge: .010/.013/.017/.026/.036/.046

Nut: Locking nut

Hardware color: Black

NECK DIMENSIONS:

 Scale : 648mm

a : Width: 42mm at NUT

b : Width: 57mm at 24F

c : Thickness: 20mm at 1F

d : Thickness: 22.3mm at 12F

Radius : 400mmR

SPECS:

Body type: Solid body

Neck type: KIKO100

Body material: Alder w/ flamed maple top

Neck joint: AANJ

Bridge: Edge tremolo

Knob style: Knurled metal dome

Hardware color: Cosmo black

NECK DIMENSIONS: 

Neck material: 5-piece maple/ walnut

Scale length: 648mm/ 25½”

Fingerboard material: Rosewood

Fingerboard inlays: Special abalone inlay on 12th fret

Frets: 24 / jumbo

SPECS:

Body type: Solid body

Body material: Mahogany w/ 3mm AAAA quilted maple top

Neck joint: AANJ

Bridge: Edge tremolo (10.8mm string spacing)

Knob style: Gotoh VK1-19 knurled metal dome

Hardware color: Cosmo black

NECK DIMENSIONS: 

Neck type: KIKO200

Neck material: 5-piece wenge/ maple

Scale length: 648mm/ 25½”

Fingerboard material: Macassar ebony

Fingerboard inlays: Small dot w/ special inlay on first fret

Frets: 24 / jumbo (Prestige edge treatment)

Nut: Top-Lok III (42mm)

Machine heads: Gotoh SG381

Dual Combo Inputs: TS, TRS, and XLR, variable impedance and level controls, built-in microphone preamps, and phantom power supplies.

Dual effects-loops

1/4” Output jacks: two mono, balanced (TRS) outputs provide pristine sound quality and optimal noise performance.

XLR Output jacks: two mono, balanced XLR output jacks.

Headphone Output

MIDI In, Out/Thru

USB: Ultra-low latency audio transmission, firmware updates, MIDI.

11 stainless steel stomp+rotary actuators for switching and rotational control. All audio connectors are Neutrik®

Three Channels:  Clean, OD2, and OD1.

Violence Switch: OD2 and OD1 channels have an assignable VIOLENCE stage for increasing the overall gain.

Push/Pull Bass Pot: Passive interactive low-frequency equalization for all channels. 

Switch: 3-way switch for negative feedback control of low-frequency interaction between amplifier and speakers. Left: Low; Center:High; Right: Medium. 

Hair Switch: 3-way switch for negative feedback control of high-frequency interaction between amplifier and speakers. Left: Medium; Center: Low; Right: High. 

Bright Switch: 3-way bright switch for each channel 

High-carbon steel core

Round wound

Gauges: 010 – 013 – 017 – w26 – 036 – 046

30% Stronger

Higher output

Enhanced frequency response in the 2 – 5 kHz for more punch, crunch and bite

Strength of the strings: 010 – 046

Strength of the strings: 0,010″–0,046″

Material: Steel

G-String Wound: No

Core of high carbon steel

Round wound

Gauges: 010-013-017 – w30-42-52

30% stronger strings and better output

Improved frequency response of 2 to 5 kHz increases beat, wrinkle and bite